Yokogawa ISC40 Inductive Conductivity Sensor ISC40S-GG-T1-05
The ISC40 inductive conductivity sensor is designed for use with the ISC202 2-wire transmitters, and the ISC450G 4-wire converter. This combination exceeds all expectations for conductivity measurement in terms of reliability, accuracy, rangeability and price performance.
This innovative inductive conductivity sensor provides highly accurate measurements over a wide measuring range (1 μS/cm to 1999 mS/cm) and process temperature range (-10 to 130 deg C) without changing the cell constant and conducting recalibration.
The erosion/abrasion resistant PEEK (Poly Ether Ether Ketone), which also features excellent chemical resistance in all solutions except Fluoric Acid or Oxidizing Concentrated Acids.
Features
| * | Inductive conductivity technique for elimination of fouling and polarization errors. |
| * | Wide bore sensors for long term stability. |
| * | Installation flexibility due to wide range of holders and due to the use of universal bulkhead construction. |
| * |
A single sensor can maintain the high resolution and accuracy, and measure the conductivity in an extremely broad range. Minimum span: 100 μS/cm Maximum span: 1999 mS/cm |
Specifications
| Compatibility | Compatible with the ISC202, ISC450G inductive conductivity transmitters/converter. |
| Measuring range | 1 μS/cm to 1999 mS/cm |
| Output span |
Minimum 100 μS/cm Maximum 1999 mS/cm |
| Process temperature | -10 to 130 deg C for continuous exposure. Suitable for steam-sterilizable applications. |
| Process pressure | Dependent on installation; but < 2 MPa (300 psi). |
| Process flow | Maximum 5 m/s. |
| Wetted materials |
Sensor: PEEK (Poly Ether Ether Ketone) Gasket: Viton® or ethylene propylene copolymer rubber Adapter (optional): SUS316 Stainless steel or PVC or PVDF |
| Non-wetted materials |
Sensor thread: SUS304 Stainless steel Retaining nut: SUS304 Stainless steel Cable: Weatherproof vinyl |
| Process connection | With retaining nut on G3/4 thread of sensor top for bulkhead mounting; optional process adapters or process fittings. |
| Process adapters |
JIS 10K 50 RF flange adapter (Material: SUS316) JIS 10K 50 FF flange adapter (Material: PVC or PVDF) DIN PN16 DN50 flange adapter ANSI CLASS150 2 flange adapter R2 screw-in adapter |
| Cable length | 5 m, 10 m, 15 m, 20 m |
| Weight | Sensor: approx. 0.6 kg |
Applications
| * | All applications where severe electrode fouling prevents the use of contacting electrodes. |
| * | All ranges except (ultra) pure water applications. |
| * | All slurry applications where conventional systems suffer from plugging or erosion. |
| * | All applications where the 6 decade rangeability is necessary for accurate process control. |
